LDR Sensor Module Circuit Diagram
LM358 Ic is used for the Project
Posts
Arduino 9 Pattern LED Chaiser By T4TECHZ
int t = 40; int rnd =5; int pat1t =75; void setup() { for(int i=3; i<=12; i++) pinMode(i,OUTPUT); } void loop(){ for(int i=0; i<=rnd; i++) { pat1();} for(int i=0; i<=rnd; i++){ pat2();} for(int i=0; i<=rnd; i++) { pat3();} for(int i=0; i<=rnd; i++) { pat4();} for(int i=0; i<=rnd; i++){ pat5();} for(int i=0; i<=rnd; i++) { pat6();} for(int i=0; i<=rnd; i++) { pat7();} for(int i=0; i<=rnd; i++) { pat8();} for(int i=0; i<=rnd; i++) { pat9();} } void pat1(){ for(int i=3; i<=12; i++) { digitalWrite(i,HIGH); delay(pat1t); digitalWrite(i,LOW); ...
Arduino 32 Pattern LED Chaiser by T4TECHZ
int led0 = 0; int led1 = 1; int led2 = 2; int led3 = 3; int led4 = 4; int led5 = 5; int led6 = 6; int led7 = 7; int led8 = 8; int led9 = 9; int led10 = 10; int led11= 11; int led12= 12; int led13= 13; void setup() { pinMode(led0,OUTPUT); pinMode(led1,OUTPUT); pinMode(led2,OUTPUT); pinMode(led3,OUTPUT); pinMode(led4,OUTPUT); pinMode(led5,OUTPUT); pinMode(led6,OUTPUT); pinMode(led7,OUTPUT); pinMode(led8,OUTPUT); pinMode(led9,OUTPUT); pinMode(led10,OUTPUT); pinMode(led11,OUTPUT); pinMode(led12,OUTPUT); pinMode(led13,OUTPUT); } void loop() { blink_1(); blink_1(); blink_2(); blink_2(); blink_3(); blink_3(); blink_4(); blink_4(); blink_5(); blink_5(); blink_6(); blink_6(); ...
Arduino LED Chaiser.. Code & Circuit Diagram by T4TECHZ
int led1 = 1; int led2 = 2; int led3 = 3; int led4 = 4; int led5 = 5; int led6 = 6; int led7 = 7; int led8 = 8; int led9 = 9; int led10 = 10; void setup() { pinMode(led1, OUTPUT); pinMode(led2, OUTPUT); pinMode(led3, OUTPUT); pinMode(led4, OUTPUT); pinMode(led5, OUTPUT); pinMode(led6, OUTPUT); pinMode(led7, OUTPUT); pinMode(led8, OUTPUT); pinMode(led9, OUTPUT); pinMode(led10, OUTPUT); } void loop() { digitalWrite(led1 = 1, HIGH); delay(10); digitalWrite(led1 = 1, LOW); delay(70); digitalWrite(led2 = 2, HIGH); delay(10); digitalWrite(led2 = 2, LOW); delay(70); digitalWrite(led3 = 3, HIGH); delay(10); digitalWrite(led3 = 3, LOW); delay(70); digitalWrite(led4 = 4, HIGH); delay(10); digitalWrite(led4 = 4, LOW); delay(70); digitalWrite(led5 = 5, HIGH); delay(10); digitalWrite(led5 = 5, LOW); delay(70); digitalWrite(led6 = 6, HIGH); delay(10); digitalWrite(led6 = 6, LOW); delay(70); digitalWrite(led7 = 7, HIGH); delay(10); digitalWrite(led7 = 7, LOW); delay(70); digitalWrite(led8 = 8, HIGH);...
Arduino 5 Effect LED Chaiser Code & Circuit Diagram by T4TECHZ
void setup() { pinMode(1,OUTPUT); pinMode(2,OUTPUT); pinMode(3,OUTPUT); pinMode(4,OUTPUT); pinMode(5,OUTPUT); pinMode(6,OUTPUT); pinMode(7,OUTPUT); pinMode(8,OUTPUT); pinMode(9,OUTPUT); } void loop() { int i; // 1st pattern repeat 1 times for(i=1; i<=10; i++) { digitalWrite(i,HIGH); delay(50); digitalWrite(i,LOW); delay(50); } for(i=10; i>=1; i--) { digitalWrite(i,HIGH); delay(50); digitalWrite(i,LOW); delay(50); } delay(1000); //2nd pattern repeat 1 times for(i=1; i<=10 ; i++) { digitalWrite(i,HIGH); delay(50); } for(i=1; i<=10 ; i++) { digitalWrite(i,LOW); delay(50); } for(i=10; i>=1 ; i--) { digitalWrite(i,HIGH); delay(50); } for(i=10; i>=1 ; i--) { digitalWrite(i,LOW); delay(50); } delay(1000); //3rd pattern repeat 1 times for(i=1; i<=10 ; i++) { digitalWrite(i,HIGH); delay(50); } for(i=11; i>=1 ; i--) { digitalWrite(i,LOW); delay(50); } for(i=10; i>=1 ; i--) { digitalWrite(i,HIGH); delay(50); } for(i=1; i<=10 ; i++) { digitalWrite(i,LOW); delay(50); }...
Arduino Blink Project Code
/* Blink Turns an LED on for one second, then off for one second, repeatedly. Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to the correct LED pin independent of which board is used. If you want to know what pin the on-board LED is connected to on your Arduino model, check the Technical Specs of your board at: https://www.arduino.cc/en/Main/Products modified 8 May 2014 by Scott Fitzgerald modified 2 Sep 2016 by Arturo Guadalupi modified 8 Sep 2016 by Colby Newman This example code is in the public domain. http://www.arduino.cc/en/Tutorial/Blink */ // the setup function runs once when you press reset or power the board void setup() { // initialize digital pin LED_BUILTIN as an output. pinMode(LED_BUILTIN, OUTPUT); } // the loop function runs over and over agai...
